This document provides step-by-step instructions on how to calibrate the touch screen on a J57.
To ensure optimal calibration of the touch screen, it is advised to utilize a stylus, pencil, or pen during steps. It is important to exercise caution and avoid applying excessive pressure on the display to prevent any potential damage to the display during the configuration process.
- Select Menu
- Enter the passcode 123 then press enter
- Select Setup
- Select Service Calibration
- Enter the passcode 519 and press enter
- Select Touch Panel Calibration
- Using the stylus, pencil, or pen, follow the on screen instruction by touching each point as they are displayed.
- Once the calibration is completed, the instrument will automatically return to the main screen.
- Test the touch screen to ensure the calibration was successful.