The instrument displays a message "You have performed 2000 reading sets, a purge of database is required before further measurements can be taken"
The steps below apply to the following instruments and software versions:
- Autopol I/II/III – Software versions starting with 1 (example 1.0.7.0)
- Autopol IV/V/V+/VI – Software versions starting with 2 (example 2.8.5.0)
To resolve the error, follow the steps below.
- Click Setup
- Enter the passcode 123
- Select Calibration And Service
- Enter the passcode 519
- Select Instrument Settings
- Select Database Maintenance
- Enter the passcode 519
- Set the Max number of readings to 3000